The project is still in searching phase, but it seem then is simple to use this open soft to use the SD card.http://elm-chan.org/fsw/ff/00index_e.html Main FATFS project page.Us...

libdca - a free DTS Coherent Acoustics decoder libdca is a free library for decoding DTS Coherent Acoustics streams. The code is written by Gildas Bazin and was based on the a5...

As search the INTERNET for sample code, the RTC can run in my sample board now!! The sample program a run in uCOS/II + miniGUI, two task created.One Task is display the curren...

真的不信可以這樣相似!!!遲啲不知可否變型,如果可以變到好像 CyberDyne HAL一樣呢?

The demo program run in the ARM kit, using keil compiler and target set to STM32F103RB + LCD driver and work fine.

Buy it form the internet, STM32F103RBT6,ARM Cortex-M3

My new project is use the Microchip TC74 Tiny Temperature sensor. This sensor using I2C with a simple command, but the Accuracy is not so good "±2°C (max.) Accuracy from +2...

Due to the 360 cable head a too large so that the HDMI cable can't be plug in. I added a hole for plugging with the HDMI to DVI converter.

This driver program is writing for USB drive with 232 interface for 16F877A.#include <16F877A.h>#device *=16 ADC=10#use delay(clock=20000000)#fuses NOWDT,HS, NOPUT, NOPROT...

The project was created with EPCOS NTC Thermistor, you can buy from farnell code 679-446, /////////////////////////////////////////////////////////////////////////////////...